Adjusting Clutch - 400/500 cc
2000 Arctic Cat models
To adjust the clutch, use the following procedure.
- Using an impact driver, remove the screws securing the cover and remove the cover. Account for the O-ring.
- Loosen the jam nuts securing adjustment screw #1 (forward) and adjustment screw #2 (rearward).
- Rotate adjustment screw #1 counterclockwise until it stops.
- Rotate adjustment screw #2 alternately clockwise and counterclockwise to ensure free movement without binding; then lock the jam nut securing adjustment screw #2.
- Rotate adjustment screw #1 clockwise 1/8 turn; then lock the jam nut securing adjustment screw #1.
NOTE: At this point the clutch should be adjusted correctly. Test to ensure accurate adjustment.
- Install the cover making sure the O-ring is properly positioned; then secure with the screws.
Updated on: Thursday, November 26, 2020