Throttle override system check
2002-2006 SX Viper 700 Series snowmobile
WARNING
When checking T.O.R.S.:
When checking T.O.R.S.:
- Be sure the parking brake is applied.
- Be sure the throttle lever moves smoothly.
- Do not run the engine up to the clutch engagement speed. Otherwise, the machine could start moving forward unexpectedly, which could cause an accident.
- Start the engine.
- Hold the pivot point of the throttle lever away from the throttle switch by putting your thumb (above) and forefinger (below) between the throttle lever pivot "1" and stop switch housing "2".
While holding as described above, press the throttle lever "3" gradually.
The T.O.R.S. will operate and the engine should run between 2,800 and 3,000 r/min.
WARNING
If the engine does not run between 2,800 and 3,000 r/min, stop the engine by turning the main switch to the OFF position and check the electrical system.
If the engine does not run between 2,800 and 3,000 r/min, stop the engine by turning the main switch to the OFF position and check the electrical system.
Updated on: Sunday, November 22, 2020